???
 
SY-B103BV Vertical Big-Sized Iron Case of Oil Seals Beveling Angle Machine

Application: Suitable for beveling iron case end of oil seals.
Features:
1.Adopts vertical feeding, put the iron case into the mold beveling fast.
2. The up mold pressurize to iron case, low manufacture cost of mold.
3. Depend on the thickness and the size of angle to adjust the speed of beveling.
4. Processing Range: Max. O.D. Ø110-Ø300mm
5. Working Capacity: 10-15 PCS/min

 

Power 3HP×6P induction motor with 20KG electromagnetic clutch brake
Hydraulic Equipment hydraulic unit 2HP
Voltage according to the customer’s assignment
Principal Shaft R.P.M 400、650、1000 RPM
Control mode air pressuresystem, PLC and converter(rotate speed adjusted)
Knife Set the end knife set x1, the bevel angle knife set x 1
Working Capacity 10-15 PCS/min
Working Range Outer Diameter Ø110～300mm
Machine Size （L）1150×（W）720×（H）1600mm
Measurement Ton （L）1350×（W）900×（H）1800mm
Machine Weight net weight：400kg 　　gross weight：500kg
NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources