|
|
| SY-SR107-4D Square Ring Cutting Machine ( 4 Shaft Type) |
 |
|
Application : Suitable use for square RING cutting (after rubber tube shaping)
Features:
1. Equip with servo motor and proface touch control for thickness cutting precisely .It is easy to operate and adjust.
2. Use precise linear motion guide, servo motor and NC operation to cut precisely and quickly.
3. After cutting is completed, the knife auto returns back. One person can control many sets of machine at the same time.
4. 4-cutting shaft can cut 4 pcs of rubber tube simultaneously to increase working efficiency.
5.Trimming Range: length : Max. 300mm Outer Diameter Ø20-Ø70mm thickness : Max. 10mm
6.Working Capacity: 35-80PCS/min
|
| |
| Power |
2HPinduction motor / servo motor : 1KW x 2 |
Power |
according to the customer's assignment |
Cutting Shaft |
four cutting shaft |
Principal Shaft R.P.M |
1300/2500RPM |
Control mode |
PLC, air pressure system and proface touch control |
Cutting Range |
Length: max. 300mm, Outer Diameter : Ø20-Ø70mm, thickness: max. 10mm |
Working Capacity |
35-80 PCS/min(each cutting shaft) |
Machine size |
（L）1300×（W）900×（H）1700mm |
Measurement Ton |
（L）1500×（W）1100×（H）1800mm |
Machine weight |
net weight：450kg gross weight：600kg |
|
|
|
