|
|
| SY-SR107D Square Ring Cutting Machine ( Double Shaft Type) |
 |
|
Application: Suitable use for square RING cutting (after rubber tube shaping)
Features:
1. Equip with servo motor and proface touch control for thickness cutting precisely.It is easy to operate and adjust.
2. Use precise linear motion guide, servo motor and NC operation to cut precisely and quickly.
3. After cutting is completed, the knife auto returns back. One person can control many sets of machine at the same time.
4. Double cutting shaft can cut 2 pcs of rubber tube at the same time to increase working efficiency.
5.Trimming Range: length : 100-250mm Outer Diameter Ø20-Ø70mm thickness : 5 -10mm
6.Working Capacity: 35-50PCS/min |
| |
| Power |
1HP motor / servo motor : 400W |
Power |
according to the customer's assignment |
Cutting Shaft |
double cutting shaft |
Principal Shaft R.P.M |
1300/2500RPM |
Control mode |
PLC, air pressure system and proface touch control |
Cutting Range |
Length: 100-250mm, Outer Diameter : Ø20-Ø70mm, thickness: 5-10mm |
Working Capacity |
35-50 PCS/min(each cutting shaft) |
Machine size |
（L）1200×（W）800×（H）1250mm |
Measurement Ton |
（L）1450×（W）1000×（H）1600mm |
Machine weight |
net weight：420kg gross weight：550kg |
|
|
|
