???
 
SY-RA104 Auto Rotary Type Trimming Machine (4-Station Type)

Application: Suitable for the trimming of the mass production oil seals, cups, packing, and soft rubber parts, etc.
Features:
1. Auto feeding, one opeator can operate many sets of machine simultaneously to increase the working efficiency.
2. Using the rotary platen for 4-station cycle to feed, locate, trim, auto offloading, and equip with machine arm to clamp and feed seals for trimming with high working efficiency.
3.Trimming Range:Max. O.D. Ø40mm
4.Working Capacity: 15-20 PCS/min
5.Accessory by choice (cost required) : Safety Fence, Safety Switch or Safety Optical Curtain.
 

Power

Motor 3/4HP

Voltage

according to the customer’s assignment

Knife Set

two knife sets

Vibratory Conveyor

The outler diameter of conveyor's platen is Ø300-Ø400mm

Trimming Angle

0-65°

Control mode

PLC and air pressure system

Working Capacity

15-20 PCS/min

Trimming Range

max. Outer Diameter Ø40mm

Working Capacity

（L）750×（W）750×（H）1700mm

Measurement Ton

（L）900×（W）1300×（H）1800mm

Machine weight

net weight：380kg　　　 gross weight：500kg

OFFICE ADDRESS: NO.36, LANE 617, CHANG SHAN RD., FU AN VILLAGE, HSIU SHUI HSIANG 504, CHUNG HUA HSLEN TAIWAN, R.O.C.
FACTORY ADDRESS: NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
 TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources