???
 
SY-PV103-600 Large-Sized Oil Seals, Rubber Packing Trimming Machine

Application: Suitable for trimming large-sized oil seals with outer diameter Ø300~Ø600mm.
Features:
1. Adopts double pressurizing rollers and vacuum type to overcome the uneasy fixation of the large-sized working pieces.
2. Lower cost of mold, and the deformed oil seals also can be trimmed .
3. Safety fence can be added on, extra cost required.
4.Trimming Range:Outer Diameter Ø300-Ø600mm
5.Working Capacity: 5-10 PCS/min
6.Accessory by choice (cost required) : Safety Fence and Safety Optical Curtain.
 

Power

Clutch motor 3HP

Voltage

according to the customer’s assignment

Knife Set

two knife sets

Pressure Wheel

two sets

Control mode

PLC and air pressure system, the speed of rotate can be adjusted

Trimming Range

Outer Diameter Ø300～Ø600mm

Working Capacity

5～10PCS/min

Vacuum mode

vacuum pump1 HP wet type 20M3/h

Machine size

（L）1100×（W）900×（H）1800mm

Measurement Ton

（L）1200×（W）1000×（H）1900mm

machine weight

net weight：500kg　　　　 gross weight：600kg

OFFICE ADDRESS: NO.36, LANE 617, CHANG SHAN RD., FU AN VILLAGE, HSIU SHUI HSIANG 504, CHUNG HUA HSLEN TAIWAN, R.O.C.
FACTORY ADDRESS: NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
 TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources