???
 
SY-PV103-350 Vacuum & Pressurizing Roller Type Trimming Machine

Application: Suitable for trimming the lip and bur of oil seals , packings rubber products ,ect. with large-sized outer diameter.
Features:
1. Adopts pressurized trimming to overcome the uneasy fixation and deformation for large-sized working pieces.
2. Use vacuum or pressurizing roller to fix working pieces for trimming, low cost of mold, and oil seals can be trimmed in case of deformation.
3. Equips with auto blowing off mold system for big-sized oil seals.
4.Trimming Range:Outer Diameter Ø150-Ø350mm
5.Working Capacity: 8-12 PCS/min
 

Power

Clutch motor 2HP

Motor 2HPx6P / ectromagnetic Clutch Brake 10kg

Voltage

according to the customer’s assignment

Knife Set

wo Knife Sets cutting angle can be adjusted 0~90°

Press wheel

two stets

Trimming Range

Outer Diameter Ø150-Ø350mm

Working Capacity

8-12 PCS/min

Vacuum mode

Air ejector 20HS

vacuum pump 1HP wet type 20M3/h

Control mode

PLC and air pressure system, the speed of rotate can be adjusted

machine size

（L）700×（W）650×（H）1850mm

Measurement Ton

（L）900×（W）850×（H）1950mm

machine weight

net weight：280kg 　　kggross weight：380kg

NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources