???
 
SY-V103 Vacuum Type Oil Seals, Cups, Packing Trimming Machine

Application: Suitable for trimming oil seals, cups, packing, and soft rubber parts, etc.
Features:
1. Use vacuum mold and the characteristic of vacuum to trim.
2. The inner diameter and outer diameter can be trimmed simultaneously or individually.
3.Two types of the machine ,double knives and 3 knives are all equiped with large-distance slide block.The angle of knife can be adjusted between 0°and 90°.
4.Trimming Range:Outer Diameter Ø10-Ø120mm, Ø120-Ø200mm
5.Working Capacity: 15-20 PCS/min
 

Power

2HP Clutch motor

Voltage

according to the customer’s assignment

Principal Shaft R.P.M

equipped with inverter and speed change stepless (500-2500RPM)

Control mode

PLC and air pressure system, cutting program can be adjusted at any time

Knife Set

two knife sets or three knife sets, cutting angle can be adjusted 0～90°

Trimming Range

outer diameter Ø10-Ø120mm, Ø120-Ø200mm

Working Capacity

15-20 PCS/min

Vacuum mode

Air ejector 15HS or 650bar vacuum degree

machine size（outlook）

（L）830×（W）750×（H）1780mm

Measurement Ton

（L）1000×（W）950×（H）1930mm

machine weight

net weight：280kg 　　　　 gross weight：380kg


OFFICE ADDRESS: NO.36, LANE 617, CHANG SHAN RD., FU AN VILLAGE, HSIU SHUI HSIANG 504, CHUNG HUA HSLEN TAIWAN, R.O.C.
FACTORY ADDRESS: NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
 TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources