???
 
SY-R103 Ring Cone Type Oil Seals Trimming Machine


Application: Special use for A Type oil seals trimming.
Features:
1. Need no other mold and lowest cost.
2. Auto feeding and throwing down, one operator can operate 2-3 sets of machine simultaneously.
3. Single slide block to trim the inner and Outer Diametermetermeter at a time.
4. Mechanical control, low rate of malfunction, simple for maintenance,
and high economic profit.
5.Trimming Range:Outer Diameter Ø16-Ø95mm
6.Working Capacity: 15-21 PCS/min
　　

Power

one motor 1/4HPx1
one clutch motor 1/4HPx1

Voltage

according to the customer’s assignment

Principal Shaft R.P.M

4000RPM

Control mode

All action program: cam control

Knife Set

single slide block with two Knifes (inner, Outer Diameter cutting at the same time )

Trimming Range

out diaØ16～Ø95mm

Working Capacity

15-21 PCS/min

machine size

（L）680×（W）680×（H）780mm

Measurement Ton

（L）1000×（W）950×（H）1700mm

machine weight

net weight：180kg　　　　 gross weight：250kg

Cups, Packing Trimming Machine

NO.64-33, SHIOUJHONG St., TZENG TSUO VILLAGE, SIOUSHUEI TOWNSHIP, CHUNGHUA COUNTY 504, TAIWAN, R.O.C.
TEL:04-7693187 FAX:04-7691087
Copyright © 2008 All Right. Taiwan Products, B2B ChinaSources, B2B TaiwanSources